rf-domain-manager
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
rf-domain-manager [capable|priority <1-255>]
Parameters
rf-domain-manager [capable|priority <1-255>]
| rf-domain-manager |
Configures the RF Domain manager election criteria |
| capable |
Enables devices using this profile capable of being elected as the RF Domain manager. The RF Domain manager stores and provisions configuration and firmware images for other members of the RF Domain. It also updates state changes, if any, to RF Domain members. This option is enabled by default. |
| priority <1-255> |
Assigns a priority value for devices using this profile in the RF Domain manager election process. The higher the number set, higher is the device‘s priority in the RF Domain manager election process.
- <1-255> – Select a priority value from 1 - 255.
|
Example
NOC-NX9500(config-profile-testNX9000)#rf-domain-manager capable
NOC-NX9500(config-profile-testNX9000)#rf-domain-manager capable
NOC-NX9500(config-profile-testNX9000)#show context include-factory | include rf-
domain-manager
rf-domain-manager capable
rf-domain-manager priority 1
NOC-NX9500(config-profile-testNX9000)#
Related Commands
| no |
Disables or reverts settings to their default |
